WOODEN TILE OF CDC

Neutral colours with a delicate Nordic design combined with reclaimed wood in strong contrast.

Certified
Quality
Learn more
WOODEN TILE OF CDC

Wooden Tile expresses the complexity of contemporary taste using surprising combinations and dense atmospheres in which the passage of time creates rich and expressive surfaces.

Modern design perspectives are about to change: amazing sizes, just 6 mm thick.
  • 26,5x240 cm
  • 26,5x240 cm
  • 26,5x240 cm
Print this page
Specification referenceE.N. 14411 . Appendix G. Group BⅠa. UGLTest methodReference valueDeclared value
Static coefficient of frictionASTM-C1028>0,60 dry and wet> 0,6 dry and wet
RECLAIMED - SLATE-HAMMERED
 
Static coefficient of friction>0,60 dry and wet> 0,6 dry and wet
RECLAIMED - MATTE
 
Static coefficient of friction>0,60 dry and wet>06 dry and wet
SLATE-HAMMERED
 
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)DCOF>0,42 wet> 0,42 wet 
Barefoot slip resistanceDIN-51097-Classe A
RECLAIMED - MATTE
Barefoot slip resistance-Classe A+B+C
RECLAIMED - SLATE-HAMMERED
Barefoot slip resistance-Classe A
MATTE
 
Barefoot slip resistance-Classe A+B
SLATE-HAMMERED
 
Slip resistance with shoesDIN-51130:2010-R10
RECLAIMED - MATTE
Slip resistance with shoes-R9 (walnut); R10 (grey, brown, white, almond)
MATTE
Slip resistance with shoes-R11
SLATE-HAMMERED
 
Slip resistance with shoes-R11
RECLAIMED - SLATE-HAMMERED
Frost resistanceISO-10545-12Richiesta / Required / Requise / Gefordert / RequeridaRESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE 
Resistance to domestic chemicals and additives for swimming poolsISO-10545-13UB minimo / UB minimum / UB minimum / UB mindestens / UB minimoUA 
Resistance to high concentrations of acids and alkaliCome dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricanteUHA 
Resistance to low concentrations of acids and alkaliCome dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricanteULA 
Resistance to stainingISO-10545-14-4 
Surface qualityISO-10545-2Il 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visiblesCONFORME/ CONFORM/ CONFORME/ KONFORM/ CONFORME 
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions±0,6% (±2 mm)±0,15% 
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions±0,5% (±2 mm)±0,2% 
Maximum straightness deviation, in %, in relation to the corresponding production dimensions±0,5% (±1,5 mm)±0,1% 
Flatness (centre curvature / edge curvature / warpage)±0,5% (±2mm)±0,35% 
Admitted deviation, in %, of the average thickness of each tile from the production dimensions±5% (±0,5 mm)±5% 
Amount of water absorbed, in percentageISO-10545-3E<0,5%average value 0,08%
Breaking strength in N (thickness >= 7,5 mm)ISO-10545-4≥1300 Newtonaverage value 3200
Bending strength in N/mm2>35 N/mm2average value 50
Resistance to deep abrasion of unglazed tilesISO-10545-6<175 mm3average value 140 
Thermal shock resistanceISO-10545-9-RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE 

Notes

  • For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

     
  • The data in the technical table does not apply to Florim Magnum Oversize products.

     
CE Wooden Tile
CE Wooden Tile Magnum
GREENGUARD
LEED Wooden Tile