STONES & MORE

A fine selection of ceramic stones and marbles, an imaginary journey through a variety of evocative landscapes to collect 8 sources of inspiration in a perfectly balanced colour range.

Certified
Quality
Learn more
STONES & MORE

Essential shapes and vintage combinations are expressed through porcelain polished tiles with different surfaces, linked together by the same philosophy of elegance.

Modern design perspectives are about to change: amazing sizes, just 6 mm thick.
  • 80x80 cm
  • 80x240 cm
  • 60x120 cm
  • 160x160 cm
  • 160x320 cm
  • 120x120 cm
  • 120x240 cm
  • 80x80 cm
  • 80x80 cm
  • 80x240 cm
  • 80x240 cm
  • 160x320 cm
  • 160x320 cm
  • 160x160 cm
  • 160x160 cm
  • 80x80 cm
  • 80x80 cm
  • 80x240 cm
  • 80x240 cm
  • 160x320 cm
  • 160x320 cm
  • 160x160 cm
  • 160x160 cm
  • 80x80 cm
  • 80x240 cm
  • 160x320 cm
  • 160x160 cm
  • 120x240 cm
  • 120x120 cm
Print this page
Specification referenceE.N. 14411 . Appendix G. Group BⅠa. UGLTest methodReference valueDeclared value
Static coefficient of frictionASTM-C1028>0,60 dry and wet> 0,6 dry and wet (burlington, brandy)
MATTE
 
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)DCOF>0,42 wet>0,42 wet
SMOOTH
 
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)>0,42 wet> 0,42
GRIP
 
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)>0,42 wet> 0,42 wet
MATTE
 
Barefoot slip resistanceDIN-51097-Classe / Class / Classe / Gruppe / Clase B
GRIP
 
Slip resistance with shoesDIN-51130:2010-R9 (zecevo, pece); R10 (burlington, brandy)
MATTE
Slip resistance with shoes-R11
GRIP
 
Slip resistance with shoes-R9
SMOOTH
 
Frost resistanceISO-10545-12Richiesta / Required / Requise / Gefordert / RequeridaRESISTENTE/RESISTANT/RÉSISTE/ERFÜLLT/RESISTE
Resistance to high concentrations of acids and alkaliISO-10545-13Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricanteUHA
GRIP
 
Resistance to low concentrations of acids and alkaliCome dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricanteULA-ULB
MATTE
Resistance to high concentrations of acids and alkaliCome dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricanteUHB
SMOOTH
 
Resistance to low concentrations of acids and alkaliCome dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricanteULA
GRIP
 
Resistance to domestic chemicals and additives for swimming poolsUB minimo / UB minimum / UB minimum / UB mindestens / UB minimoUA
Resistance to low concentrations of acids and alkaliCome dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricanteULB
SMOOTH
 
Resistance to high concentrations of acids and alkaliCome dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricanteUHA-UHB
MATTE
Resistance to stainingISO-10545-14-3-4 
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensionsISO-10545-2±0,6% (±2 mm)±0,15% 
Flatness (centre curvature / edge curvature / warpage)±0,5% (±2mm)±0,35% 
Admitted deviation, in %, of the average thickness of each tile from the production dimensions±5% (±0,5 mm)±5% 
Surface qualityIl 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visiblesCONFORME/CONFORMING/CONFORME/KONFORM/CONFORME 
Maximum straightness deviation, in %, in relation to the corresponding production dimensions±0,5% (±1,5 mm)±0,1% 
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions±0,5% (±2 mm)±0,2% 
Amount of water absorbed, in percentageISO-10545-3E<0,5%average value 0,08%
Breaking strength in N (thickness >= 7,5 mm)ISO-10545-4≥1300 Newtonaverage value 3200
Bending strength in N/mm2>35 N/mm2average value 50
Resistance to deep abrasion of unglazed tilesISO-10545-6<175 mm3average value 140
SMOOTH
 
Resistance to deep abrasion of unglazed tiles<175 mm3average value 140
MATTE
Resistance to deep abrasion of unglazed tiles<175 mm3average value 140
GRIP
 

Notes

  • For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

     
  • The data in the technical table does not apply to extra-large sizes. For the technical specifications of Magnum Oversize, please refer to the leaflet in “Downloads”.

     
Specification referenceE.N. 14411 . Appendix L. Group BⅢ. GLTest methodReference valueDeclared value
Glaze crazing resistenceISO-10545-11Richiesta / Required / Requise / Gefordert / RequeridaRESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE 
Resistance to low concentrations of acids and alkaliISO-10545-13Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricanteGLA 
Resistance to domestic chemicals and additives for swimming poolsGB minimo / GB minimum / GB minimum / GB mindestens / GB minimoGA 
Resistance to stainingISO-10545-14classe 3 minimo / class 3 minimum / classe 3 minimum / klasse 3 mindestens / classe 3 mínimoClasse / Class / Classe / Gruppe / Clase 4-5 
Maximum straightness deviation, in %, in relation to the corresponding production dimensionsISO-10545-2±0,3% (±1,5 mm)±0,3% 
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions±0,5% (±2 mm)±0,5% 
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions±0,5% (±2 mm)±0,5% 
Flatness (centre curvature / edge curvature / warpage)+0,5% -0,3% (+2mm, -1,5 mm) / +0,5% -0,3% (+2mm, -1,5 mm) / ±0,5% (± 2mm)+0,5% -0,3% (+2mm, -1,5 mm) / +0,5% -0,3% (+2mm, -1,5 mm) / ±0,5% (± 2mm) 
Admitted deviation, in %, of the average thickness of each tile from the production dimensions±10% (±0,5 mm)±10% 
Surface qualityIl 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visiblesconforme/conforming/conforme/konform/conforme 
Amount of water absorbed, in percentageISO-10545-3E>10%average value 0,08% 
Breaking strength in N (thickness >= 7,5 mm)ISO-10545-4≥600 Newtonaverage value 3200 
Bending strength in N/mm2>12 N/mm2average value 50 
Thermal shock resistanceISO-10545-9-RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE 
Specification referenceE.N. 14411 . Appendix G. Group BⅠa. GLTest methodReference valueDeclared value
Glaze crazing resistenceISO-10545-11Richiesta / Required / Requise / Gefordert / RequeridaRESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE 
Frost resistanceISO-10545-12Richiesta / Required / Requise / Gefordert / RequeridaRESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE 
Resistance to domestic chemicals and additives for swimming poolsISO-10545-13GB minimo / GB minimum / GB minimum / GB mindestens / GB minimoGA 
Resistance to low concentrations of acids and alkaliCome dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricanteGLB 
Resistance to stainingISO-10545-14classe 3 minimo / class 3 minimum / classe 3 minimum / klasse 3 mindestens / classe 3 mínimo>3 
Admitted deviation, in %, of the average thickness of each tile from the production dimensionsISO-10545-2±5% (±0,5 mm)±5% 
Surface qualityIl 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visiblesCONFORME / CONFORMING / CONFORME / KONFORM / CONFORME 
Maximum straightness deviation, in %, in relation to the corresponding production dimensions±0,5% (±1,5 mm)±0,1% 
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions±0,5% (±2 mm)±0,2% 
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions±0,6% (±2 mm)±0,15% 
Flatness (centre curvature / edge curvature / warpage)±0,5% (±2mm)±0,35% 
Amount of water absorbed, in percentageISO-10545-3E<0,5%average value 0,08%
Bending strength in N/mm2ISO-10545-4>35 N/mm2average value 50 
Breaking strength in N (thickness >= 7,5 mm)≥1300 Newtonaverage value 3200 
Resistance to abrasion of glazed tilesISO-10545-7Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricanteclasse 4
Thermal shock resistanceISO-10545-9-RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE 

Notes

  • For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

     
  • The data in the technical table does not apply to extra-large sizes. For the technical specifications of Magnum Oversize, please refer to the leaflet in “Downloads”.

     
CE Stones & More
CE Stones & More Magnum
GREENGUARD
LEED Stones & More