PIETRE/2

Sensation, emotion, seduction and – why not? – passion.

This is Pietre/2, the stone cladding representing a perfect synthesis of technology, material and poetry.

Certified
Quality
Learn more
PIETRE/2

Eight colours, novel graphic suggestions, surfaces enriched with tactile detail. The decorations that adorn the ceramic series draw their primary inspiration from nature.

Print this page
Specification referenceE.N. 14411 . Appendix G. Group BⅠa. UGLTest methodReference valueDeclared value
Static coefficient of frictionASTM-C1028>0,60 dry and wet> 0,6 dry and wet
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)DCOF>0,42 wet> 0,42 wet 
Barefoot slip resistanceDIN-51097-A
Slip resistance with shoesDIN-51130-R10*
Frost resistanceISO-10545-12Richiesta / Required / Requise / Gefordert / RequeridaRESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE
Resistance to domestic chemicals and additives for swimming poolsISO-10545-13UB minimo / UB minimum / UB minimum / UB mindestens / UB minimoUA
Resistance to low concentrations of acids and alkaliCome dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricanteULA
Resistance to high concentrations of acids and alkaliCome dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricanteUHA
Resistance to stainingISO-10545-14-Classe 5 
Maximum right-angle deviation, in %, in relation to the corresponding production dimensionsISO-10545-2±0,5% (±2 mm)± 0,20% 
Maximum straightness deviation, in %, in relation to the corresponding production dimensions±0,5% (±1,5 mm)± 0,10% 
Admitted deviation, in %, of the average thickness of each tile from the production dimensions±5% (±0,5 mm)± 5% 
Surface qualityIl 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visiblesCONFORME / CONFORMING / CONFORME / ENTSPRICHT / CONFORME 
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions±0,6% (±2 mm)± 0,15 
Flatness (centre curvature / edge curvature / warpage)±0,5% (±2mm)± 0,35% 
Amount of water absorbed, in percentageISO-10545-3E<0,5%< 0,10% 
Breaking strength in N (thickness >= 7,5 mm)ISO-10545-4≥1300 Newton1300 
Bending strength in N/mm2>35 N/mm2> 35
Resistance to deep abrasion of unglazed tilesISO-10545-6<175 mm3< 150
Thermal shock resistanceISO-10545-9-RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE

Notes

For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats. </br> *In accordance with document BGR 181 (FuBböden in Arbeitsräumen und Arbeitsbereichen mit Rutschgefahr, aktualisierte Fassung Oktober 2003), Florim recommends this material to be used on indoor floors or indoor and/or outdoor wall coverings.
CE Pietre/2
GREENGUARD
LEED Pietre/2