ICON OUTDOOR

The new solution for exterior ceramic design: practical, versatile and instantly ready for use, with jointless outdoor installation on grass, gravel or sand.

Certified
Quality
Learn more
ICON OUTDOOR

Wood effect floor tiles composed of more than 70% recycled materials: the contents of Icon Outdoor are certified by the Bureau Veritas institute in compliance with international standard ISO 14021.

Print this page
Specification referenceE.N. 14411 . Appendix G. Group BⅠa. UGLTest methodReference valueDeclared value
Static coefficient of frictionASTM-C1028>0,60 dry and wet> 0,60 dry and wet 
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)DCOF>0,42 wet> 0,42 wet 
Barefoot slip resistanceDIN-51097-Classe / Class / Classe / Gruppe / Clase C 
Slip resistance with shoesDIN-51130:2010-R11 
Frost resistanceISO-10545-12Richiesta / Required / Requise / Gefordert / RequeridaRESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE 
Resistance to high concentrations of acids and alkaliISO-10545-13Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricanteUHA 
Resistance to low concentrations of acids and alkaliCome dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricanteULA 
Resistance to domestic chemicals and additives for swimming poolsUB minimo / UB minimum / UB minimum / UB mindestens / UB minimoUA 
Resistance to stainingISO-10545-14-4 
Maximum right-angle deviation, in %, in relation to the corresponding production dimensionsISO-10545-2±0,5% (±2 mm) ± 0,20% 
Maximum straightness deviation, in %, in relation to the corresponding production dimensions±0,5% (±1,5 mm) ± 0,10% 
Admitted deviation, in %, of the average thickness of each tile from the production dimensions±5% (±0,5 mm) ± 5% 
Surface qualityIl 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visiblesCONFORME / CONFORMING / CONFORME / ENTSPRICHT / CONFORME 
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions±0,6% (±2 mm) ± 0,15% 
Flatness (centre curvature / edge curvature / warpage)±0,5% (±2mm) ± 0,35% 
Amount of water absorbed, in percentageISO-10545-3E<0,5%average value 0,08% 
Breaking strength in N (thickness >= 7,5 mm)ISO-10545-4≥1300 Newtonaverage value 14000
Bending strength in N/mm2>35 N/mm2average value 50
Resistance to deep abrasion of unglazed tilesISO-10545-6<175 mm3average value 140 
Thermal shock resistanceISO-10545-9-RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE 

Notes

  • For optimal installation results, Florim recommends maintaining a joint of 2 mm 1/12” for single format installations and 3 mm 1/8” to combine mixed formats.

     
Bureau Veritas Icon Outdoor
CE Icon Outdoor
GREENGUARD
LEED Icon