FLAGSTONE 2.0

The vibrant energy of Flagstone project, one of the most representative Casa dolce casa series, was never spent and makes a comeback with a new contemporary look.

Certified
Quality
Learn more
FLAGSTONE 2.0

The echo of the past is evoked by the richness of the structural and colour details; the constant, formal syntax produces a déjà vu, perfectly blending past and present.

Print this page
Specification referenceE.N. 14411 . Appendix G. Group BⅠa. UGLTest methodReference valueDeclared value
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)DCOF>0,42 wetwet > 0,42
MATTE
 
Barefoot slip resistanceDIN-51097-Cl. A
Slip resistance with shoesDIN-51130:2010-R10
MATTE
 
Slip resistance with shoes-R11
SLATE-HAMMERED
Frost resistanceISO-10545-12Richiesta / Required / Requise / Gefordert / RequeridaRESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE 
Resistance to low concentrations of acids and alkaliISO-10545-13Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricanteULB
GLOSSY
 
Resistance to high concentrations of acids and alkaliCome dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricanteUHB
GLOSSY
 
Resistance to high concentrations of acids and alkaliCome dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricanteUHA
MATTE
 
Resistance to domestic chemicals and additives for swimming poolsUB minimo / UB minimum / UB minimum / UB mindestens / UB minimoUA 
Resistance to low concentrations of acids and alkaliCome dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricanteULA
MATTE
 
Resistance to stainingISO-10545-14-Cl. 4 
Admitted deviation, in %, of the average thickness of each tile from the production dimensionsISO-10545-2±5% (±0,5 mm)±5% 
Surface qualityIl 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visiblesCONFORME / CONFORMING / CONFORME / KONFORM / CONFORME 
Flatness (centre curvature / edge curvature / warpage)±0,5% (±2mm)±0,35% 
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions±0,6% (±2 mm)±0,15% 
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions±0,5% (±2 mm)±0,2% 
Maximum straightness deviation, in %, in relation to the corresponding production dimensions±0,5% (±1,5 mm)±0,1% 
Amount of water absorbed, in percentageISO-10545-3E<0,5%average value 0,08% 
Bending strength in N/mm2ISO-10545-4>35 N/mm2average value 50 N/mm2 
Breaking strength in N (thickness >= 7,5 mm)≥1300 Newtonaverage value 3200 
Resistance to deep abrasion of unglazed tilesISO-10545-6<175 mm3average value 140 mm3 
Thermal shock resistanceISO-10545-9-RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE 
CE Flagstone 2.0
GREENGUARD
LEED Flagstone 2.0